Canadian Test Data

ASTM D3960-05(13) “Volatile Organic Compound Content (VOC)”

Test Name: ASTM D3960-05(13)
Location: KTA
Test Date: 10.16.18

Once again Contego (HS) achieves a superior zero VOC rating. Contego Intumescent isn’t a LOW VOC product, it is a NO VOC product with VOC levels too low for currently available technology to detect.

Click here for full test



ASTM D2794-93(10) “Standard Test Method for Resistance of Organic Coatings to the Effects of Rapid Deformation Impact”

Test Name: ASTM-D2794-93(10)
Location: KTA
Test Date: 09.17.2018

Our ASTM D-4060 test was conducted September 17, 2018 at KTA. The coating was applied to steel panels 4” x 6” x 0.025” via draw down bar at a wet mil thickness of 30 mils. The coating was determined to have a direct impact resistance of 40 in-lbs and an indirect impact resistance of 4 in-lbs.

Click here for full test

 

ASTM D4060-14 “Standard Test Method for Abrasion resistance of Organic Coatings by the Taber Abraser”

Test Name: ASTM-D4060-14
Location: KTA
Test Date: 09.17.2018

Our ASTM D-4060 test was conducted September 17, 2018 at KTA. The coating was applied to 4” x 4” panels via draw down bar at a wet mil thickness of 30 mils. Duplioate panels were tested, and the average weight loss was determined to be 295.4 mg.

Click here for full test

 

ASTM D2240 -15e1 Durometer hardness: Shore D

Test Name: ASTM-D2240
Location: KTA
Test Date: 03.21.2018

Our ASTM D-2240 test was conducted March 21, 2018 at KTA. The test was performed on one panel one side measuring 4”x 8” with an average coating thickness of 239.5 mils. Results are baed on the average of five readings Shore D value 66.

Click here for full test

 

BXUV – Fire Resistance Ratings – ANSI/UL 263 BXUV7 – Fire Resistance Ratings – CAN/ULC-S101 Certified for Canada

Test Name: Design No. D603 BXUV D603 Fire-resistance Ratings – ANSI/UL 263
Location: UL
Test Date: 07.17.2017

Contego now has a UL intumescent deck assembly for corrugate pan decking that exceeds two hours. Restrained Assembly Rating — 1, 1-1/2 and 2 Hr. (See Items 2 and 7) Unrestrained Assembly Rating — 1, 1-1/2, and 2 Hr. (See Items 2 and 7) Unrestrained Beam Rating — 1, 1-1/2, and 2 Hr. (See Items 2 and 7)

Click here for full test

 

ASTM D4541-09e1 “Pull-Off Strength of Coatings Using Portable Adhesion Testers”

Test Name: ASTM-D4541-09e1
Location: KTA
Test Date: 09.25.2013

Our ASTM D-4541 test was conducted September 25, 2013 at KTA and showed over 630 PSI, more than twice that of our closest competitor and four times that of others.  Combined with results of our ASTM D3359 test using both the cross cut and ribbon cut methods with 0% loss, nothing beats Contego’s adhesion.

Click here for full test

 

ASTM E-119  “Standard Methods of Fire Tests of Building Construction & Materials”
(UL-263, ULC-S101, ANSI A-2.1, NFPA 251 & UBC 7-1)

Beams & Columns at Omega Point, Revised at Intertek

Test Name:  ASTM E119-00a
Location: Omega, revised at Intertek
Test Date: 07.08.2005, revision date 8.17.2017

This was a test of various structural steel column sizes with different coating thicknesses. The lightest of the series was a W8x31 with only 50 mils of Contego, which lasted just over 1 hour. The heaviest specimen, a W12x106 with 74 mils never failed.

Click here for full test

 

ULc-S101 on Oriented Strand Board (OSB)  “Fire Resistance Test”

Location:       Intertek Laboratories, Coquitlam, BC CANADA

Test Date:     12.10.2011


This test is designed to run to 15 minutes but we ran it to just over 25 minutes delivering results better than any the laboratory technicians had ever seen from any intumescent product.

Click here for full test

 

ULc-S101/UL-263  “Full Scale on Structural Steel – 3 hours”

Location:       Intertek Laboratories, Coquitlam, BC CANADA

Test Date:     01.20.2012


This was a full scale test using two sizes of beams and decking with 4” of concrete. The concrete was placed in segmented panels with a 1” gap to avoid the supportive effect that would happen with one contiguous pour. It was then loaded with an additional 1038 lbs/lf using hydraulic jacks. The test went to 174 minutes restrained for the lighter beams and decking and 176 minutes for the heavier section.

Click here for full test

 

ULc-S102/UL-723  “Fire Resistance Test”

Location:       Intertek Laboratories, Coquitlam, BC CANADA

Test Date:     12.21.2011


We tested our thinnest specimen yet (3/8”) of OSB with our thinnest coat ever (8 mils dft) and still got Flame Spread and Smoke Production stats of 5×40.

Click here for full test

 

Original Formula Product Data Sheet

High Solids Product Data Sheet

Material Safety Data Sheet (MSDS)

 

View Test Data by Substrate Request Information Kit