International Fire Tests

PN-EN 13501-1:2007+A1,2009. “Fire Classification of construction products and building elements”

Location: Instytut Techniki Budowlanej (Poland)
Test Date: 8.23.2016

This test determines the EN Classification of CON-RFB on wood products using test data from reaction to fire tests. It results in an A2FL,s1,d0 Wood Classification.

 

PN-EN 1366-6:2006. “Fire resistance for service installations. Part 6: Raised access and hollow core floors”
Location: Instytut Techniki Budowlanej (Poland)
Test Date:
8.23.2016

Remarkable results on a raised Chip-Board floor panel structure. The test was stopped when the rock-wool, used as sealant around the panel frame, ignited after 45 minutes. CON-RFB would have continued it’s excellent protection of the chip-board had the sealant used been effective.

 

EN 13381-8:2013 Protecting I and H structural steel sections to EN and British Standards

Location: Exova Warrington United Kingdom
Test Date:  1.26.2016

Loaded I beam and H columns with minimum/maximum protection thickness.  Time/temp results posted on Certifire and ETAG.

Click Here for Certifire Assesment

Click Here for the Certifire Certificate

Click Here for the EN Assesment

Click Here for the ETA Document

 

EN 13823 (SBI Method) and EN ISO 11925-2 Flame Spread and Smoke Production

Location: SP Technical Research Institute of Sweden
Test Date:  11.11.2014

A reaction to fire classification on sandwich composite MOLN foam panels with GRP surfaces. Establishing a superior Reaction to fire classification of B-s1,d0

Click here for full test

Click here for reaction to fire classification report

 

EN 13823: 2010 Test on 12mm OSB Flame spread and smoke production.

Location: The BUILDING TEST CENTRE
Test Date:  04.18. 2013

A reaction to fire test report covering a single burning item test on Contego High Solids intumescent Fire Barrier paint conducted in accordance with EN 13823: 2010

Click here for full test

 

EN ISO 11925-2:2010 Ignitability test on OSB

Location: The BUILDING TEST CENTRE
Test Date:  04.18. 2013

A reaction to fire test  covering ignitability performance when subjected to direct impingement of flame in accordance with EN ISO 11925-2:2010

Click here for full test

 

BS EN 13501-1:2007+A1:2009 Reaction to Fire Performance

Location: The BUILDING TEST CENTRE
Test Date:  04.18. 2013

Contego achieved a remarkable classification for smoke production; fire behavior and flaming droplets of B-s1,d0 as a result of the combination of the EN 13823;2010 and the EN ISO 11925-2:2010

Click here for full test

 

Comparison Letter of E84 and BS 476 Part 7

 

Load Bearing Engineering Letter at Omega

 

Omega BS476 Engineering Letter

 

Grinnell Mutual Fire Test “Contego Contained Fire in Grinnell Mutual Research”

 

Wood Door Engineering “Contego Fire Barrier on Solid Core Doors”

 

Australia Propane Test “Investigation into the Effect of Vehicle Fires on the Integrity of LP Gas Containers Installed to AS/NZS 1425:2007”

 

Australia Foam Panel “Fire Test of Composite Panel for EOS Dome”

 

Load Comp Omega Opinion “ASTM E 119 – Alternative Test of Protection for Structural Steel Columns”

 

British Standards vs. ASTM Engineering “ASTM E 119 – Alternative Test of Protection for Structural Steel Columns”

 

British Standards 476-20-21-22 vs. ASTM119 “ASTM E 119 – Alternative Test of Protection for Structural Steel Columns”

 

Sweden EN 13823 and EN ISO 11925-2 testing “Moln”, foam core and GRP surface layer on both sides

 

Sweden Fire test according to EN 13823 (SBI Method) and EN ISO 11925-2, part 2

 

Estonia Classification of Reaction to Fire in accordance with EVS-EN 13501-1:2007

 

Original Formula Product Data Sheet

 

High Solids Product Data Sheet

 

Material Safety Data Sheet (MSDS)

 

 

View Test Data by Substrate

 

Request Information Kit